Overview of KE2 Combo Display
The KE2 Combo Display is an advanced display system designed to work with the KE2 Evap OEM controllers, providing a remote display and additional features for enhanced functionality․ The display is typically installed on the front of a Polar King unit, allowing users to easily access and monitor the room temperature and other key settings․ With the KE2 Combo Display, users can also adjust set points for the Evap OEM Board and access other important parameters․ The display is preprogrammed with default set points for both the Evap OEM Board and the Combo Display, making it easy to get started․ The KE2 Combo Display is a key component of the KE2 remote display system, offering a user-friendly interface and advanced features for efficient operation and monitoring․ The display is designed to be intuitive and easy to use, with a clear and concise layout that makes it simple to navigate and access important information․
KE2 Combo Display Features
Installation and Setup of KE2 Combo Display
The installation and setup of the KE2 Combo Display is a crucial step in ensuring the proper function of the device․ To begin, the display must be mounted in a location that is easily accessible and visible to the user․ The mounting hardware provided with the display should be used to secure it to the wall or other surface․ Once the display is mounted, the power cord can be connected and the device can be turned on․ The setup menu will appear on the screen, allowing the user to configure the device settings and options․ The user can navigate through the menu using the arrow buttons and select options using the enter button․ The setup process typically takes only a few minutes to complete, and the device is then ready for use․ The KE2 Combo Display is designed to be easy to install and set up, with clear instructions and a user-friendly interface․
KE2 Remote Display User Manual
Configuring WiFi Radio on KE2 Controller
To configure the WiFi radio on the KE2 controller, start by connecting a remote display to the controller․ Then, simultaneously press and hold the right arrow button and back button until the display reads WIFI ON․ Next, find the controller on your device and enter the SSID of KE2RE-xxxx, where xxxx is the last 4 digits of the serial number of the controller․ The WiFi radio is normally off, so this step is necessary to turn it on․ Once the WiFi radio is on, you can use it to connect to the internet and access various features and settings․ The KE2 controller’s WiFi radio is an important feature that allows for remote communication and control․ With the WiFi radio enabled, you can use the KE2 remote display to monitor and control the controller from a remote location․ This feature is convenient and easy to use, making it a valuable tool for anyone using the KE2 controller․ The configuration process is straightforward and can be completed in a few simple steps․
KE2 LowTemp Defrost Quick Start Guide
Remote Communication and Control with KE2-EM
